YS-110 (Orange)
(Product No.03106)
Accessories: fixing bolt, diffuser
* Different cords and connectors will be required depending on the specific camera you are using.
Make sure that you order the appropriate cord. Cords are sold separately.
* Specifications subject to change without notice.
DS-TTL adds more light with just the right exposure for compact digital cameras underwater.
The YS-110 strobe is packed with ground-breaking features designed for the new age of digital photography. When it’s connected via a fiber-optic cable to a compact digital camera with TTL metering, the YS-110 strobe offers DS-TTL (Digital Slave Through-The-Lens) light adjustment. DS-TTL follows the camera’s TTL-adjusted flash for automatically accurate flash photography. You can use two YS-110 strobes for creative effects with subtle light balance. For example, you can set one strobe to DS-TTL mode and the second strobe to manual mode. The YS-110’s mode compensation function provides a light level control dial for just the right balance of light.
The YS-110 also provides full manual control that sets flash intensity that is independent of the camera. The 13-step manual control provides a finely graded variety of light settings up to a powerful maximum setting of guide number 22. Three xenon tubes positioned in the strobe provide a flat balance all the way across a circular beam angle of 105° (with diffuser), with even and consistent light that will satisfy even finicky professionals.
The YS-110 contains a high-luminosity white LED target light located in the center of its front face. The target light turns on with a convenient button press on the strobe’s rear panel, and turns off automatically when the YS-110 flashes. You can connect the strobe to digital SLR cameras and film cameras using the same cables that connect conventional YS-series strobes. You can also connect the strobe to compact digital cameras using a fiber-optic cable.
The YS-110 is a versatile strobe designed for almost any use.
| Item |
Specifications |
A: Alkaline, O: Oxyride, Ni-MH |
| Guide Number (ISO 100/m)(land) |
22 |
| Beam Angle |
105°× 105° (with diffuser) |
| Batteries 4× AA |
• A: 6V • O: 6V • Ni-MH: 4.8V |
| Number of Flashes*1 |
• A: 160 • O: 230 • Ni-MH: 320 |
| Recycle time (full)*2 |
• A: 6 • O: 3 • Ni-MH: 3 |
| Color temperature |
5400K |
| Color temperature w/diffuser |
5100K |
| Depth rating |
60m / 200ft |
| Dimensions(WxHxD) |
88x115x150mm / 3.5x4.6x6inch |
| Weight |
700g / 24.5oz |
| Underwater weight |
-10g / -0.4oz |
| Others |
•Exposure control: DS-TTL, TTL, Light level control dial (GN): 2/2.8/3.5/4/5.6/6.7/8/9.5/11/13/16/19/22 (13 steps) •Pre-flash control : Equipped with pre-flash cancel mode (cancels one pre-flash) •Slave function •TTL slave (cordless TTL) •Sync Cord: Detachable Sync Cord with film & digital SLR camera, fiber-optic cable (L-type) with a compact digital camera. •Over-pressure relief valve.
•LED target light |
*1 Number of flashes and recycle time depend on the battery brand, temperature and frequency of use.
*2 Number of flashes and recycle time of Ni-MH batteries were tested by 2700mAh batteries. |
